quantcore_circuits.analysis.synthesis

LOM-first synthesis: target Hamiltonian → circuit parameters → layout starting values.

This is the “LOM → layout” step of the loop. From targets (f_q, α, f_r, g) it computes EJ/EC → Lj and C_Σ, the λ/4 resonator length (Metal’s CPW model for the PDK stack) and the qubit–resonator coupling capacitance Cg that gives g. The geometry knobs that realise C_Σ and Cg (cross length, claw length) are then tuned by simulation (quantcore_circuits.optimise).

Functions

coupling_capacitance_fF(g_MHz, f_r_GHz, ej_GHz, ec_GHz) → float

Cg giving coupling g to the open end of a λ/4 resonator: ħg = 2e (Cg/C_Σ) V_rms <1|n|0>.

cpw_properties(f_GHz, a_um, b_um[, pdk_name, kinetic]) → dict

Guided wavelength, phase velocity, ε_eff and Z0 of a CPW on the PDK stack (Metal cpw_calculations).

quarter_wave_length_um(f_r_GHz, a_um, b_um[, pdk_name]) → float

synthesize_transmon_readout(f_q_GHz, alpha_MHz, ...[, ...]) → dict

Targets → {EJ, EC, Lj, C_Σ, Cg, resonator length, expected χ}.

Module Contents

quantcore_circuits.analysis.synthesis.coupling_capacitance_fF(g_MHz: float, f_r_GHz: float, ej_GHz: float, ec_GHz: float, z0: float = 50.0) → float

Cg giving coupling g to the open end of a λ/4 resonator: ħg = 2e (Cg/C_Σ) V_rms <1|n|0>.

quantcore_circuits.analysis.synthesis.cpw_properties(f_GHz: float, a_um: float, b_um: float, pdk_name: str = DEFAULT_PDK, kinetic: bool | None = None) → dict

Guided wavelength, phase velocity, ε_eff and Z0 of a CPW on the PDK stack (Metal cpw_calculations).

The film’s kinetic inductance (pdk.kinetic, decision #45) adds L’_k to the geometric L’ (Metal’s values): v = v_geo/√(1+L’_k/L’), Z0 = Z0_geo √(1+L’_k/L’), λ and ε_eff (= (c/v)²) follow. kinetic=False forces the purely geometric values (None: the PDK’s switch). Extra keys: L_geo_nH_per_m, L_k_nH_per_m, alpha_k (L’_k/(L’+L’_k)).

quantcore_circuits.analysis.synthesis.quarter_wave_length_um(f_r_GHz: float, a_um: float, b_um: float, pdk_name: str = DEFAULT_PDK) → float
quantcore_circuits.analysis.synthesis.synthesize_transmon_readout(f_q_GHz: float, alpha_MHz: float, f_r_GHz: float, g_MHz: float, a_um: float = 10.0, b_um: float = 6.0, pdk_name: str = DEFAULT_PDK) → dict

Targets → {EJ, EC, Lj, C_Σ, Cg, resonator length, expected χ}.