quantcore_circuits.lom.synthesize

LOM → layout: qubit/resonator targets (or a circuit.json) → component knobs → a laid-out chip.

  1. Circuit values. For every transmon + λ/4 readout pair: f_q, α, f_r and g → E_J, E_C, Lj, C_Σ, C_g (LOM synthesis, synthesize_transmon_readout()).

  2. Knobs. A surrogate built from the component calibration (Xmon cross_length → C_island, claw_length → C_g and claw pad; no FEM needed) is inverted with the same QuTiP forward model the co-design loop uses, so claw loading of the resonator and the dressed shifts are accounted for (propose()).

  3. Layout. Template "feedline": bond pads W/E on the chip’s mid line, a straight feedline, the qubits below it at equal spacing, each with its readout meander hanging off the feedline and a flux line from a bottom pad. Built with Designer (live=True shows it being laid out in KLayout).

The result is an ordinary design; simulate it (Q3D/HFSS/Palace), fill the circuit, and the co-design loop takes it from there.

Classes

Functions

knobs_for_pair(p[, pdk_name, cj_fF, a_um, b_um]) → dict

Xmon cross/claw, Lj and resonator length that hit p (calibration surrogate + QuTiP forward model).

layout_from_circuit(model[, name])

LOM → layout for a CircuitModel with transmon + λ/4 pairs and targets.

layout_from_targets(name, pairs[, box, pdk, live, ...])

Lay out pairs on one feedline (see module docstring). Returns the Designer.

pairs_from_circuit(model) → list[PairTarget]

Transmon + λ/4 pairs and their targets from a CircuitModel.

Module Contents

class quantcore_circuits.lom.synthesize.PairTarget
alpha_MHz: float
f_q_GHz: float
f_r_GHz: float
g_MHz: float
qubit: str
resonator: str
quantcore_circuits.lom.synthesize.knobs_for_pair(p: PairTarget, pdk_name: str = DEFAULT_PDK, cj_fF: float = 2.0, a_um=10.0, b_um=6.0) → dict

Xmon cross/claw, Lj and resonator length that hit p (calibration surrogate + QuTiP forward model).

quantcore_circuits.lom.synthesize.layout_from_circuit(model, name: str | None = None, **kw)

LOM → layout for a CircuitModel with transmon + λ/4 pairs and targets.

quantcore_circuits.lom.synthesize.layout_from_targets(name: str, pairs: list[PairTarget], box=(0.0, 0.0, 7500.0, 7500.0), pdk: str = DEFAULT_PDK, live: bool = False, template: str = 'feedline', **designer_kw)

Lay out pairs on one feedline (see module docstring). Returns the Designer.

quantcore_circuits.lom.synthesize.pairs_from_circuit(model) → list[PairTarget]

Transmon + λ/4 pairs and their targets from a CircuitModel.