Component placement status (quantcore cells, through the KLayout plugin)¶
Generated from kplugin/gui_smoke_components.py (real KLayout, scratch design per cell, 2026-11-15).
Steps per cell: places = panel select (parameter table fills), arm (double-click path), ghost redraw with rotate / mirror, click to drop, size check;
edit = edit dialog (one numeric parameter +10 %), applied to design.json, plus the double-click path; connect = Connect a directed port to a BondPad port, then rebuild;
build = the rebuild after the drop, the edit and a native (KLayout) move that syncs to design.json. n/a = the step does not apply.
cell |
places |
edit |
connect |
build |
notes |
|---|---|---|---|---|---|
Flipmon |
ok |
ok |
ok |
ok |
ports without direction: squid_a, squid_b (ghost draws boxes) |
Gatemon |
ok |
ok |
ok |
ok |
ports without direction: squid_a, squid_b (ghost draws boxes) |
TransmonTaperedInsets |
ok |
ok |
ok |
ok |
ports without direction: squid_a, squid_b (ghost draws boxes) |
TwoPadTransmon |
ok |
ok |
ok |
ok |
SQUID ports have no direction (null): ghost draws them as boxes (was the crash) |
Xmon |
ok |
ok |
ok |
ok |
|
QuantcoreJunction |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
QuantcoreSquid |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
SquidV0 |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
TrilayerJunction |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
TrilayerJunctionCompact |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
TrilayerJunctionHSQ |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
TrilayerSquid |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
TrilayerSquidHSQ |
ok |
ok |
n/a (no directed port) |
ok |
ports without direction: common (ghost draws boxes) |
GatemonCoupler |
ok |
ok |
ok |
ok |
|
HyperbolicVertexCoupler |
ok |
ok |
ok |
ok |
|
PadCoupler |
ok |
ok |
ok |
ok |
|
CpweFingerCapacitor |
ok |
ok |
ok |
ok |
|
CpweFingerLine |
ok |
ok |
ok |
ok |
|
CpweGapCapacitor |
ok |
ok |
ok |
ok |
|
SmoothCapacitorSemicircle |
ok |
ok |
ok |
ok |
|
CoupledResonator |
ok |
ok |
ok |
ok |
end port is a capacitive tail, not galvanic: use the hanger for a readout (see README) |
CpweQuarterWaveResonator |
ok |
ok |
n/a (no directed port) |
ok |
no ports (a coupler arm only); lambda/4 for CPWE chips, place it next to the line by hand |
CpwResonator |
ok |
ok |
ok |
ok |
|
LumpedJpa |
ok |
ok |
ok |
ok |
ports without direction: squid_a, squid_b (ghost draws boxes) |
QubitResonator |
ok |
ok |
ok |
ok |
end port is a capacitive tail, not galvanic: use the hanger for a readout (see README) |
SpiralLine |
ok |
ok |
made, build refused (routing error shown; Undo) |
ok |
ports are 2 um CPW and 1.8 deg off-axis: a Connect to a 10/6 BondPad cannot route (error shown, Undo) |
BondPad |
ok |
ok |
ok |
ok |
|
ConnectorPad |
ok |
ok |
ok |
ok |
|
CpweBondPad |
ok |
ok |
ok |
ok |
|
CpweOpenEnd |
ok |
ok |
ok |
ok |
|
NeckTermination |
ok |
ok |
ok |
ok |
|
SquidTermination |
ok |
ok |
ok |
ok |
ports without direction: squid_a, squid_b (ghost draws boxes) |
CoupledConnector |
ok |
ok |
ok |
ok |
|
CpweMeanderLine |
ok |
ok |
ok |
ok |
|
CpweTaper |
ok |
ok |
ok |
ok |
|
CpwSegment |
ok |
ok |
ok |
ok |
|
JtwpaChain |
ok |
ok |
ok |
ok |
|
KiTwpaSerpentine |
ok |
ok |
ok |
ok |
no etched outline (bbox only ghost) |
AlignmentMarkers |
ok |
ok |
n/a (no directed port) |
ok |
chip-sized marker set (7350 um); fits a 7500 um chip |
BoundaryBox |
ok |
ok |
n/a (no directed port) |
ok |
chip-frame box (5010 um) |
CornerMarker |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
CrossMarker |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
DicingMarker |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
EbeamMarker |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
GlobalMarker |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
WaferMap75 |
ok |
ok |
n/a (no directed port) |
ok |
wafer-scale (100 mm); builds, but the plugin warns in the status bar that it is larger than the chip |
JunctionGroundPad |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
JunctionTestPads |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
ProbePadPair |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
TaperedPad |
ok |
ok |
ok |
ok |
|
ArcPath |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
JJFingerBent |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
JJFingerStraight |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
SpiralPath |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
TextLabel |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
FluxHoleArray |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
FluxHoles |
ok |
ok |
n/a (no directed port) |
ok |
no ports |
Totals: 57 cells; places ok 57; edit ok 57; build ok 57; connect ok 29, connect n/a 27, connect FAIL 0.
Not standalone on a chip: WaferMap75 (wafer-level: it builds but is 100 mm wide; the status bar says so). Junction / SQUID cells, markers and other children place and build alone (a junction without a qubit is just a drawn shape). Whole-chip checks (Check, Run LOM on a design with no qubit, readout hanger) are in the same smoke, section [no-qubit design] / [readout resonator] of its output.