ChipFrame¶
The PCell declaration for a chip frame.
Source: KQC (KQCircuits). Category: marker. Module: kqcircuits.elements.chip_frame.
See also the catalog.
Pins¶

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.
No pins: this cell has no ports. Place it with at= / rot=.
Parameters¶
name |
default |
unit |
description |
|---|---|---|---|
|
|
μm |
Width of center conductor |
|
|
μm |
Width of gap |
|
|
μm |
Turn radius |
|
|
μm |
Dicing width |
|
|
µm |
Label text size |
|
|
µm |
Width of the chip dicing reference line |
|
|
µm |
Length of the chip dicing reference line |
|
|
µm |
Gap between two chip dicing reference dashes |
|
|
µm |
Vertical size of character in face label |
|
|
– |
Margin between dicing edge and ground grid |
|
|
– |
Name of the mask |
|
|
– |
Name of the chip |
|
|
– |
Name of the copy |
|
|
– |
Name of the brand |
|
|
– |
Margin for labels |
|
|
– |
Marker distance from edges |
|
|
– |
Number of diagonal squares for the markers |
|
|
– |
Marker type for each chip corner, clockwise starting from lower left |
|
|
– |
Insert chip dicing lines in base metal addition |
|
|
– |
Show face label below variant label |
|
|
– |
Margin for face label, fills ground grid avoidance around label |
|
|
µm |
X offset of face label, from top right corner of chip |
|
|
µm |
Y offset of face label, from top right corner of chip |
Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.
LOM model¶
none (a LOM build gives each pin its own bare node, without elements).
How to use¶
In Python:
from quantcore_circuits.designer import Designer
d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "ChipFrame", at=(3750, 3750), a=10) # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=
Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components ChipFrame lists the pins; add --schema for the parameters.
In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.