qcc_kplugin.actions¶
qcc menu actions (GUI only; geometry/JSON logic lives in design_io / geometry, building in qcc).
Attributes¶
Functions¶
Quantcore > Check and LOM > Check design: the DRC tab plus the full check (netlist) in the background. |
|
Quantcore > Edit > Delete route...: a route chosen from the list, failed ones first (they have no cell to select |
|
A copy of the selected component (same cell, parameters, rotation, mirror, junction) follows the mouse in |
|
PCell parameters + rotation of the component selected with KLayout's own select tool (or under the |
|
Mirror the selected component (about its own x axis, before its rotation or snap). |
|
A blank PDK die as a new design.json, opened and built: then place components from the Quantcore panel. |
|
Selected path(s) → routes: ends snap to ports, corners become waypoints bent to the route radius. |
|
Place the component selected in the Quantcore panel (with the parameters shown there); without a selection, |
|
|
|
|
|
|
Quantcore > Check and LOM > Run LOM: export the circuit and simulate it in a background process; the LOM tab |
|
The component selected with KLayout's own select tool, else the one under the Move/Snap cursor. |
|
The route selected with KLayout's own select tool (a route cell carries its design name in |
|
Settings > live PCells on / off (on: the library loads in the background; off: the next build is static). |
|
Quantcore > Check and LOM > Stop LOM simulation: stop the running LOM (the process this panel started), drop its |
Instances moved with KLayout's own move tool → |
|
|
Module Contents¶
- qcc_kplugin.actions.check_design()¶
Quantcore > Check and LOM > Check design: the DRC tab plus the full check (netlist) in the background.
- qcc_kplugin.actions.configure()¶
- qcc_kplugin.actions.delete_instance()¶
- qcc_kplugin.actions.delete_route()¶
Quantcore > Edit > Delete route…: a route chosen from the list, failed ones first (they have no cell to select and delete with KLayout’s own Delete).
- qcc_kplugin.actions.duplicate_selected()¶
A copy of the selected component (same cell, parameters, rotation, mirror, junction) follows the mouse in Move/Snap; a click drops it.
- qcc_kplugin.actions.edit_selected()¶
PCell parameters + rotation of the component selected with KLayout’s own select tool (or under the Move/Snap cursor): the same dialog as double-clicking it in Move/Snap.
- qcc_kplugin.actions.mirror_selected()¶
Mirror the selected component (about its own x axis, before its rotation or snap).
- qcc_kplugin.actions.new_design()¶
A blank PDK die as a new design.json, opened and built: then place components from the Quantcore panel.
- qcc_kplugin.actions.open_design()¶
- qcc_kplugin.actions.path_to_route()¶
Selected path(s) → routes: ends snap to ports, corners become waypoints bent to the route radius.
- qcc_kplugin.actions.place_component()¶
Place the component selected in the Quantcore panel (with the parameters shown there); without a selection, open the panel to pick one.
- qcc_kplugin.actions.rebuild()¶
- qcc_kplugin.actions.redo()¶
- qcc_kplugin.actions.run_lom()¶
Quantcore > Check and LOM > Run LOM: export the circuit and simulate it in a background process; the LOM tab of the panel shows modes, parameters against targets, netlist values and the circuit drawing.
- qcc_kplugin.actions.screenshot()¶
- qcc_kplugin.actions.selected_component() str | None¶
The component selected with KLayout’s own select tool, else the one under the Move/Snap cursor.
- qcc_kplugin.actions.selected_route() str | None¶
The route selected with KLayout’s own select tool (a route cell carries its design name in
id).
- qcc_kplugin.actions.set_live_pcells(on: bool) None¶
Settings > live PCells on / off (on: the library loads in the background; off: the next build is static).
- qcc_kplugin.actions.show_dock()¶
- qcc_kplugin.actions.stop_lom()¶
Quantcore > Check and LOM > Stop LOM simulation: stop the running LOM (the process this panel started), drop its partial output and show the state from before the run.
- qcc_kplugin.actions.sync_placements()¶
Instances moved with KLayout’s own move tool →
place.at(snap-placed ones become absolute).
- qcc_kplugin.actions.toggle_live()¶
- qcc_kplugin.actions.undo()¶
- qcc_kplugin.actions.COLUMNS_TEXT = 'Long dialogs in two columns (every dialog scrolls and fits the screen)'¶
- qcc_kplugin.actions.LABEL_TEXT = 'Instance name labels in the layout: height µm (0 = none)'¶